Touch 2 Switch 2-Channel Relay

Description

This electronic relay has 2 independent channels. Each output can drive 70 Watt. The small size allows installation in the handlebar or headlight. You can switch different loads with one push button. Two different inputs allow you to control each output with the pushbutton, whether the pushbutton is wired to ground or + 12V. The Touch 2 Switch module can also be used as a standard toggle switch relay. Just connect the thin brown input cable directly to ground and the thin blue input cable directly to + 12 volts. That's it. Now the module switches between output 1 and output 2 when you press the button wired to the thin purple cable.

• Inputs for non-locking push-button switches in separate mode and for locking switches if the channels are linked together.
• You can use very thin cables for the connection between the buttons and the module
• 2 independent channels, that can be linked together in order to increase the maximum load to 120 Watt.
• The small dimensions allow an implementation in the most handle bars.
• The module can also work as voltage inverter.
• Push-button switch (not latching) with connection to chassis or to + 12 Volt

Details

Part#:

919976

Voltage:

12 V

Height:

11 mm

Unit:

Each

Length:

38 mm

Width:

16 mm

Catalog Page:

6.25

Cataloge Link:

LINK

Qty.:

1