Pro-4 Duo 12V 5A Automatic Diagnostic Battery Charger x 4

Description

OptiMate Pro-4 Duo is the automatic diagnostic charger for 4 x 12V Pb lead-acid (STD, AGM, GEL) and/or 12.8V LFP lithium (LiFePO4 / Lithium Ferrous Phosphate) batteries. The 4 bank battery charger can independently charge, test and maintain 4 x 12V lead-acid and 12.8V / 13.2V lithium LFP batteries. Four fully independent 5 Amp charging stations / banks, each with 3 selectable modes to service new and used batteries – activate 4 x new, or save and/or charge and test 4x used batteries. Automatically save any type of deep discharged battery from as low as 0.5 Volts, additionally for LFP lithium, manually reset the protective BMS and save from zero volts – dead-flat, neglected batteries can be recovered. State of health test for good (80 to 100%), ok (60 – 80%) or bad (below 60%) batteries – confirms if battery is serviceable or should be replaced. Designed for the global professional, including battery service, new powersport vehicle and/or new battery sales – service orientated product designed for continuous use. Each bank delivered with a replaceable output cord and fused battery clip set, AC power cord is replaceable / exchangeable.

• For 12V lead-acid (STD/AGM/GEL), 12.8V/13.2V LiFePO4, Pb/LFP batteries
• 0.2A to 5A variable charging amps (Ampmatic)
• 0.5V to 14.4V charging volts @ 12V lead-acid mode
• 11.4V to 14.4V charging volts @ 12.8V/13.2V Lithium LFP mode
• 0.5V to 14.4V charging volts @ 60' mode
• Class II AC cord suitable for region, 180cm charge lead extender, fused battery clips included
• Global (100-240V 50-60Hz)
• AC Class 2 input socket, with ON/OFF switch, 15cm output cord
• IP40 indoor rating

3 selectable opereation modes:

• Pb: for 12V lead-acid (STD / AGM / GEL) batteries
• LFP: for 12.8V / 13.2V LiFePO4 batteries
• 60': A shortened program with charge time limited to 60 minutes , suitable for first charge / activation of a new battery, or a quick recharge of a healthy used battery with voltage higher than 11.4V.

Note: If no selection (Pb or LFP) is made prior to connecting a battery for charge, the 60' mode becomes the default selection.

Details

Part#:

928140

Unit:

Each

Qty.:

1