Please note that this is a discontinued item that is excluded from exchange or return.
All Badlands Intensifier High/Low Modules are designed to provide an inexpensive method to convert a wire incandescent, Halogen or LED light into a dual function or HI/LOW light. Example, if you are installing an old school tail light that has only wire for illumination and wire for ground you would need our IHL-01 Module. This module will allow you to have running and brake light illumination on that single wire! If you purchased a new pair of turn signals and they only have wire for illumination and wire for ground, you would need our IHL-02 Module. You would install this module to the front or rear turn signal output wires and a protected switched 12+ power source. Then the output of our module would feature turn signal and running light functions on wire per side. If room is an issue, (custom bike application) our IHL-03 Intensifier will perform the same functions of our IHL-02 but are only rated for 500-milliamps maximum.